|
Replacement
bowls
and parts for
Kirsten®
pipes
!!! Discount on purchases of 4 or
more bowls. !!!
Factory made:
buy 4, get the 4th (= the cheapest) for free !
Made by Elie:
buy 4, get the 4th (= the cheapest) at 1/2
price.
Please
note: for purchases of
bowls and parts, to be shipped outside the
European community, I have to pack well, make
customs- and registering documents, pay Paypal
fees, drive to the post-office (and stand in
line there for 15min.), etc. Therefor, I
had to set the minimum order at €50,00 (excl.
shipping). Between €50,00 and €75,00,
there might be handling fees of €15,00 and
Paypal fees of around 5%. Please ask for a
quote. Being a professional artisan,
paying taxes etc., there's no profit for me on
orders below €75,00. Only losses.
Thank you for your kind understanding.
More info: click
the 'Info' button on the left side of this page.
All
bowls with no specific indication = BRIAR
burl wood
For inch-users:
OR USE:
Bowls for Kirsten®
pipes
by Elie.
UNIQUES.
Big ones and small ones.
Please
SCROLL DOWN
Front
caps for Kirsten® pipes
For model S.
Commissioned, so: sold.
All
made
piece by piece, not CNC (computer-automated)
like the original factory ones. Not
only nice, but also some extra cooling. The
hole on the side has been made a little
larger, to make sure that smoke flows as
required. Due to wear in used
Kirstens, or hard cleaning after purchasing
a used (and mostly blocked) Kirsten pipe,
one might be faced with an offset of the
holes. (Note: irregularities on the holes
have been rectified after taking the
pictures)
These series are for Kirsten
C and for some other models
with a straight 7/16" bore at the plug
side.
€38,00/each.
All made piece by piece, not CNC
(computer-automated) like the original
factory ones. Not only nice, but also
some extra cooling.
These series are for Kirsten
M and K and
for some other models with a 7/16" bore
and a conical end at the plug side.
(Note: after photographing, I made
marks on them to point at the 'open'
position)
€38,00/each.
Your Kirsten® can now be equipped with the
ESuperKool system.
For more information on this high quality
upgrade:
NEW
!ETK systems for Kirsten
NEW
! THE ETK-system.
A little bit
less effective than the ESK in cooling and
filtering, but even more affordable.
Still exceeds by very far the original pin
of Kirsten pipes in cooling and
filtering. It forces the smoke to pass
along the body without just going straight,
hot and unfiltered to your mouth.
The one,
pictured above is for a Kirsten M
Price =
€63,00. On special order.
This
one is a unique prototype,
made for
Kirsten S.
Only one
available: €47,00
Off
the shelf ESK systems for Kirsten
Note: I can no longer
accept non-off-the-shelf orders for
Kirsten ESK mouthpieces. I loose
money on them. Sorry about that.
Unless you want to pay €98,00 + shipping.
The system has even been approved now
(picture will follow). They will
still be produced to be fitted with the
metal pipes that I make.
These
ESK-systems are WYSIWYG: what you see is what
you get / the pictured one is the one you will
receive.
ESK S02 for
Kirsten® S
(Ø system = 9,45mm / 0.375")
€75,00
ESK S03 for
Kirsten® S
(Ø system =
9,45mm / 0.375")
€75,00
ESK S04 for
Kirsten® S
SOLD
ESK S05 for
Kirsten® S
SOLD
ESK S06 for
Kirsten® S
SOLD
ESK
M01 for Kirsten®
M and K
SOLD
Fully handmade mouthpiece, starting from epoxy
resin.
Heat resistant silicone O-ring.
ESK M02 for
Kirsten® M
SOLD
Price includes:
-A round cleaning brush
-Heat resistant (1100°C) anti-seize compound
Some
archive examples (all sold)
(Example. This one for
Kirsten®
S. Handmade
acrylic mouthpiece.)
(Example. This one for Kirsten®
M. Fully
handmade acrylic mouthpiece.)
(Example. This one for Kirsten® Gem. Fully
handmade acrylic mouthpiece.)
(Example. This one for a Kirsten® Companion
K. Started from rough acrylic mouthpiece.
Earlier model, no O-ring.)
(Example. This one for a Kirsten® full
bend. Fully handmade
acrylic mouthpiece.)
 (Example. Starting
from a rough acrylic mouthpiece.)
All my
ESuperKools are made 'piece by piece'. No
automatic CNC production. Lots of choices in
mouthpieces. This system is hollow inside,
so: very, very light.
There are several Kirstens in my collection, and
have had Kirsten bodies send to be upgraded with
the ESK system. So, I have data. All
systems have been fitted on Kirsten pipes of
various years. But, please mind that my
straight ESK-system cannot be fitted into the bend
Kirsten bodies (series C, R, etc.)
Mouthpieces
for Kirsten pipes
Mouthpieces for
model S and K
Drilled, so you can easily place your
original Kirsten-pin in it (with some
glue). To remove your original
aluminum 'system' (...), just heat it up,
take a cloth or kitchen mittens (not to burn
your hands) and pull it out. But don't
heat it too much. It could melt.
Price = €38,00
Mouthpieces
for models M
Drilled
as described above.
Price =
€29,00
Can be
equipped with an ESK or an ETK system.
Mouthpieces for models
A, L and XL
Drilled as described above.
Price =
€25,00 (example above = sold)
Can
be equipped with an ESK or an ETK system.
Screws and
adapters for Kirsten pipes.
Standard
'Kirsten-size': €3,90/each -- €8,00/3 screws
Aluminium.
Also available in a shorter size for some
older models that have no adapter on the
bottom of the bowl. Stainless steel,
same price.
Aluminum
SORRY, ALL SOLD OUT
Will
probably not be produced anymore due to the
loss I made on them.
(Sold them for €3,90/each, €8,00/3pcs.
Real cost in hours and materials: ±€9,00/each)
Bowls for Kirsten®
pipes
by Elie.
UNIQUES
KB127
= €49,00
/ KB128 = €49,00
Can be used with or without the original
Kirsten®
adapter (under-cup). Please indicate
your choice. In case you prefer as is,
you'll receive a short SS hollow screw free of
charge. In case you want to use it with
the original adapter (not incl.), the bottom
hole will be widened free of charge,
but if needed: screw is extra (€3,90).
KB121
= €48,00
/ KB122 = €49,00
/ KB124 =
€49,00
Can
be used with or without the original Kirsten®
adapter (under-cup). Please indicate
your choice. In case you prefer as is,
you'll receive a short SS hollow screw free of
charge. In case you want to use it with
the original adapter (not incl.), the bottom
hole will be widened free of charge,
but if needed: screw is extra (€3,90).
KB116
= €52,00
/ KB117 = €47,00
/ KB118 = €48,00
/ KB119 = €48,00
/
KB120 = €49,00
Can
be used with or without the original Kirsten®
adapter (under-cup). Please indicate
your choice. In case you prefer as is,
you'll receive a short SS hollow screw free of
charge. In case you want to use it with
the original adapter (not incl.), the bottom
hole will be widened free of charge,
but if needed: screw is extra (€3,90).
KB112 = €46,00 /
KB113 = €48,00
/ KB114 (olive wood) = €48,00
/
KB115 (olive
wood) = €48,00
Can
be used with or without the original Kirsten®
adapter (under-cup). Please indicate
your choice. In case you prefer as is,
you'll receive a short SS hollow screw free of
charge. In case you want to use it with
the original adapter (not incl.), the bottom
hole will be widened free of charge,
but if needed: screw is extra (€3,90).
Magnum
Bowls, all sold.
Can
be used with or without the original Kirsten®
adapter (under-cup). Please indicate
your choice. In case you prefer as is,
you'll receive a short SS hollow screw free of
charge. In case you want to use it with
the original adapter (not incl.), the bottom
hole will be widened free of charge, but if
needed: screw is extra (€3,90).
KB91 = €37,00
(Very old Grecian briar) / KB93 =
€39,00 (Very old Grecian briar)
Can
be used with or without the original Kirsten®
adapter (under-cup). Please indicate
your choice. In case you prefer as is,
you'll receive a short SS hollow screw free of
charge. In case you want to use it with
the original adapter (not incl.), the bottom
hole will be widened free of charge,
but if needed: screw is extra (€3,90).
KB84
=
€37,00 (strawberry tree wood)
These
4 are smaller bowls (usually used for
model S. Around 28mm in height. Like
most in the Value Packs, to be seen a bit
lower on this page.)
Can
be used with or without the original Kirsten®
adapter (under-cup). Please indicate
your choice. In case you prefer as is,
you'll receive a short SS hollow screw free of
charge. In case you want to use it with
the original adapter (not incl.), the bottom
hole will be widened free of charge,
but if needed: screw is extra (€3,90).
KB82 = €25,00
/ KB83 = €25,00
Can be used with or without the
original Kirsten®
adapter (under-cup). Please indicate
your choice. In case you prefer as is,
you'll receive a short SS hollow screw free of
charge. In case you want to use it with
the original adapter (not incl.), the bottom
hole will be widened free of charge,
but if needed: screw is extra (€3,90).
KB75
= €30,00
Can
be used with or without the original Kirsten®
adapter (under-cup). Please indicate
your choice. In case you prefer as is,
you'll receive a short SS hollow screw free of
charge. In case you want to use it with
the original adapter (not incl.), the bottom
hole will be widened free of charge,
but if needed: screw is extra (€3,90).
KB69
= €39,00 / KB72 = €44,00
(wonderful birds-eye on top)
Can
be used with or without the original Kirsten®
adapter (under-cup). Please indicate
your choice. In case you prefer as is,
you'll receive a short SS hollow screw free of
charge. In case you want to use it with
the original adapter (not incl.), the bottom
hole will be widened free of charge,
but if needed: screw is extra (€3,90).
KB67 = €39,00
/ KB68 = €35,00 (olive wood)
Can
be used with or without the original Kirsten®
adapter (under-cup). Please indicate
your choice. In case you prefer as is,
you'll receive a short SS hollow screw free of
charge. In case you want to use it with
the original adapter (not incl.), the bottom
hole will be widened free of charge,
but if needed: screw is extra (€3,90).
KB61 = €35,00
Can
be used with or without the original Kirsten®
adapter (under-cup). Please indicate
your choice. In case you prefer as is,
you'll receive a short SS hollow screw free of
charge. In case you want to use it with
the original adapter (not incl.), the bottom
hole will be widened free of charge.
In that case: use the original screw
(not incl.)
KB46 = €33,00 Strawberry
tree wood (smokes very sweet) has a cup
mounted, use original screw (not incl.)
Can
be used with or without the original Kirsten®
adapter (under-cup). Please indicate
your choice. In case you prefer as is,
you'll receive a short SS hollow screw free of
charge. In case you want to use it with
the original adapter (not incl.), the bottom
hole will be widened free of charge,
but if needed: screw is extra (€3,90).
KB42 = €39,00
Can
be used with or without the original Kirsten®
adapter (under-cup). Please indicate
your choice. In case you prefer as is,
you'll receive a short SS hollow screw free of
charge. In case you want to use it with
the original adapter (not incl.), the bottom
hole will be widened free of charge,
but if needed: screw is extra (€3,90).
KB38 = €38,00 /
KB40 = €39,00 /
KB41 = €37,00
Can
be used with or without the original Kirsten®
adapter (under-cup). Please indicate
your choice. In case you prefer as is,
you'll receive a short SS hollow screw free of
charge. In case you want to use it with
the original adapter (not incl.), the bottom
hole will be widened free of charge,
but if needed: screw is extra (€3,90).
KB34 =
€39,00 KB36 = €40,00 Top=dark green
KB15:
fixed
adapter + ss. hollow screw incl. €35,00
Can be
used with or without the original Kirsten®
adapter (under-cup), except of KB12 and
KB15. Please indicate your choice.
In case you prefer as is, you'll receive
a short SS hollow screw free of charge.
In case you want to use it with the
original adapter (not incl.), the bottom hole
will be widened free of charge,
but if needed: screw is extra (€3,90).
KB17:
don't
use cup, ss. hollow screw incl. €33,00 /
KB18:
don't
use cup, ss. hollow screw incl. €33,00 /
KB19:
don't
use cup, ss. hollow screw incl. €33,00
Can be
used with or without the original Kirsten®
adapter (under-cup). Please indicate
your choice. In case you prefer as is,
you'll receive a short SS hollow screw free of
charge. In case you want to use it with
the original adapter (not incl.), the bottom
hole will be widened free of charge,
but if needed: screw is extra (€3,90).
KB21:
fixed
cup + alu hollow screw incl. €34,00 /
KB22:
fixed
cup + ss. hollow screw incl. €34,00 /
KB23:
fixed
cup + ss. hollow screw incl. €35,00
Can be
used with or without the original Kirsten®
adapter (under-cup). Please indicate
your choice. In case you prefer as is,
you'll receive a short SS hollow screw free of
charge. In case you want to use it with
the original adapter (not incl.), the bottom
hole will be widened free of charge,
but if needed: screw is extra (€3,90).
KB26:
use
without cup, ss. hollow screw incl.
€34,00 /
KB27:
fixed
cup + ss. hollow screw incl. €34,00
Can be
used with or without the original Kirsten®
adapter (under-cup). Please indicate
your choice. In case you prefer as is,
you'll receive a short SS hollow screw free of
charge. In case you want to use it with
the original adapter (not incl.), the bottom
hole will be widened free of charge,
but if needed: screw is extra (€3,90).
KB28:
use
without cup, ss. hollow screw incl.
€33,00 /
KB29:
fixed
cup + use orig. screw (not incl.)
€37,00 /
KB30:
fixed
cup + alu hollow screw incl. €36,00 /
KB31:
fixed
cup + alu hollow screw incl. €34,00
/
KB32:
use
without cup, ss. hollow screw incl.
€35,00
Can be
used with or without the original Kirsten®
adapter (under-cup). Please indicate
your choice. In case you prefer as is,
you'll receive a short SS hollow screw free of
charge. In case you want to use it with
the original adapter (not incl.), the bottom
hole will be widened free of charge,
but if needed: screw is extra (€3,90)
KB2009/03:
21,00€
KB2009/05: 21,00€
Value
packs
of 5 bowls for Kirsten S !
(lighter not incl. only for
size estimate)
Factory
bowls, modified
by Elie.
Value
pack
05
To
be
used without adapter.
Only
€75,00
2 (shorter) stainless
steel
screws
incl.
In
case you prefer to use your adapter:
bottom hole will be widened, no
SS-screws incl.
Value
pack
06
To
be
used without adapter.
Only
€75,00
2 (shorter) stainless
steel
screws
incl.
In
case you prefer to use your adapter:
bottom hole will be widened.
Value
pack
07
To
be
used without adapter.
Only
€75,00
2 (shorter) stainless
steel
screws
incl.
In
case you prefer to use your adapter:
bottom hole will be widened.
Value
pack
08
To
be
used without adapter.
Only
€75,00
2 (shorter) stainless
steel
screws
incl.
In case you prefer to use your
adapter: bottom hole will be widened.
Kirsten®
Bowls, factory made
Best for model S (small bowls), unless
you want to have short smokes, or a very light
pipe.
Unsmoked
/
New
Ki 04: to be used without the adapter.
(For use
with adapter/widening hole: +€1,00/each and
+€3,90 for a shorter hollow stainless steel
screw)
All bowls
01-04: stamped Kirsten
Ki04:
€21,00
All to
be used without the adapter.
(For use with adapter/widening hole: +€1,00 and
+€3,90 for a shorter hollow stainless steel
screw)
€20,00/each
All bowls
unstamped, but 99% sure made by Kirsten.
Experimental
bowl:
  
This design-bowl was an
experiment to create a cool-grip
bowl. Despite of all the work
that went into it, this bowl
couldn't be finished on the same
level as my other bowls.
Having
trouble inserting
a screw into a bowl ?
Use this trick:
Bowls for EKool:
Currency converter.
Today's official exchange rates (first button):
To
Elie's metal / system pipes
Steve's free web templates
|
